UPCOMING EVENT: PHOENIX BASS FISHING LEAGUE - 2020 - Dale Hollow Lake

How to Hand-Pour Swimbaits

How to Hand-Pour Swimbaits

My first attempt at pouring soft-plastic baits was in 2005, when I ordered a basic worm-making kit from an online retailer. The description on that kit read “This kit is for the beginner or hobbyist who wants to produce a limited amount of worms for personal use,” which was perfect for me.

The only problem was that this was before the days of YouTube how-to videos and helpful websites like TackleUnderground.com, and I didn’t know what I was doing. The day the kit arrived, without any helpful resources, I broke it open, skimmed the directions and promptly burned the first pan of plastisol in my parents’ kitchen. I think I managed to pour five shaky worms successfully. Then the box went into a closet and didn’t emerge again until spring of 2012.

By that point, I was living on my own, and came across an article on soft-plastic bait-making in a magazine, which reignited my interest. I dug up the kit, found an old used microwave, bought a Pyrex measuring cup, a pair of heat-resistant gloves and a few painting facemasks, and was ready to give it another try, this time with better equipment and some more information. With the help of that article and some online resources, my experience the second time was much more enjoyable.

While I still consider myself a novice, I’ve learned a lot since then. I’ve also learned that you can get lost down a rabbit hole by doing too much online research. So, this article is intended to give you the basic understanding of how to pour swimbaits, because I want other people to experience the same joy I do when a bass smashes a bait that you poured yourself.

 

Safety 101

First, and most importantly, follow all safety directions provided by the manufacturer of the products you choose to use. Wear all the recommended personal protective equipment, including gloves, a respirator, glasses, long sleeves, pants and sneakers. Never let water or moisture come in contact with hot plastisol. Moisture will turn to steam immediately when it contacts the plastisol, which can cause it to spew in all directions. Always pour in a well-ventilated area like a garage, with the doors and windows open. Use a fan to blow the fumes away from your workspace. And keep children out of the work area.

 

 

What you need

My first kit came with a silicone hand-pour variety mold, 2 pints of plastisol, three 1-ounce bottles of colorant, 1 ounce of scent, two special pouring pans, a color wheel mixing guide and instructions. I’ve added to my equipment since then and have been able to boil it down to the bare minimum of what you need to get started.

1. Microwave – I prefer to use a microwave to melt the plastisol. It’s just easy.

2. Pouring cup – A Pyrex measuring cup works best.

3. Mixer – A screwdriver works fine (the one I use was left in my car after someone broke into it).

4. Molds – I used the BTS Molds 637 open-pour 3 1/2-inch swimbait mold for this article, but there are others out there. I started with open-pour molds because it’s a quick, easy way to get going. You can also find injection molds, which would require investing in an injector.

5. Liquid plastic (plastisol) – You can buy it at Tackle Warehouse here. I suggest buying 1 pint to start. That’s enough to make about 35 3 1/2-inch swimbaits.

6. Plastic colorant – The Do-It Essential Series Colorants work well.

7. Glitter – Do-It also makes Essential Series Glitter.  

More optional gear – Some other useful but not essential pieces of equipment you might keep on hand are measuring spoons, baking sheets, a logbook or journal, and an infrared thermometer. You’ll see the thermometer used in one of the reference photos. I purchased it because I was having a hard time with laminate pours and wanted to know the temp when I was pouring, but it’s not required for basic pours.

 

Get started pouring

Make sure you have a clean, organized workspace. You’ll be working with hot (325 to 350 degree) liquid. I prefer working over a baking sheet, because any plastic that spills on it will peel off and can be reused. Lay out all the equipment you need before starting.

Here are the steps to follow:

 

1. Measure out the right amount of plastisol. For this pour, 1/2 cup made eight 3 1/2-inch swimbaits. Depending on the size/number of molds you’re pouring, you might need more. Mold manufacturers and online resources can help with some guidance, but experimentation is sometimes needed. I typically use less when I’m trying a new color, so I don’t waste it if I wind up not liking the end result. Just remember that you will need to increase the amount of colorant and glitter to match the increase in plastisol.

 

2. Heat the plastisol. Here’s the heating protocol I follow: 1) Heat the plastisol in the microwave for 1 minute, 2) stir, 3) microwave for 30 seconds, 4) stir, 5) microwave 30 seconds and 6) stir.

By this point it should be very close to the 325- to 350-degree mark. Plastisol goes through three different stages: 1) liquid, 2) cloudy/lumpy and 3) crystal clear/silky smooth. The last point occurs around 340 degrees. An infrared thermometer makes it easy to see when the plastisol has reached the correct temperature, but even without it, you can tell it’s ready for the next step when it turns crystal clear.

 

3. Add colorant and glitter, then stir. Start by stirring in one drop at a time. Some colors are stronger than others, and you never want to add too much. You can always make the color darker, but you can never make it lighter. As for glitter, the same rule applies. After a few pours, you’ll start to dial in how much of both to use for the look you’re after.

 

4. Caution: Extremely Hot! Slowly pour plastic into the mold. Start at the top, and fill slowly, working back toward the tail. Slightly overfill the mold because the plastic shrinks as it cools.

Tip: If you live where it’s cold, like I do in Buffalo, it’s not a bad idea to preheat the mold before pouring during the cooler seasons. I do it from the fall through spring using a toaster over. “Cold cracking” can occur in baits when they’re poured into a cold mold, at least until the mold warms up.

 

5. Allow the bait to cool for at least five minutes. Let it cool 10 to 15 minutes if you pre-heated your aluminum mold.

 

6. Open the mold to remove the swimbait.

 

7. Place baits flat side down on the baking sheet to cure overnight.

 

 8. The swimbait is now ready to fish.

 

A few tips

- Keep your plastisol well mixed.

- Save scraps and any old baits (baits you made or bought) because they can be re-melted. Scraps also include the leftover material in your pouring cup. It will peel right out and can be reused in other pours.

- Start light when adding colorant. You can always go darker.

- Heat the plastisol slowly until you get a feel for the process. Overheated plastisol will scorch, turn yellow and become unusable.

- You will need to reheat during long pours. It is safe to do so even with glitter and color already added. Just be sure to do it in short increments, 15 to 30 seconds at a time. Be sure to stir each time, which will help prevent scorching.

 

Give it a try

I hope this helps you get started making baits. There is nothing like catching a fish on a bait you made yourself. Be sure to follow all safety instructions, as heated plastisol can burn skin very quickly and is very painful. If you have any questions, feel free to DM me on instagram @fishshots_charleswaldorf, and I will help the best I can.

Tags: charles-waldorf  article 

The Top 5 Limits of All Time

The Top 5 Limits of All Time

Catching 25 pounds in a single tournament day is a pretty rare feat, and catching five bass for 30 pounds in a tournament has been done fewer than 200 times in FLW history. Knowing just how special those giant limits are, we decided to dig into some of the top bags from years past. READ MORE »

Pickwick Midday Update – Day 2

Pickwick Midday Update – Day 2

The red-hot shad spawn bite that fueled the big catches on day one of the Toyota Series Central Division event on Pickwick has fizzled this morning. READ MORE »

A New Outlook on AOY

A New Outlook on AOY

As the 2020 Tackle Warehouse Pro Circuit season looks to start back up in June on Lake Chickamauga, there are some new factors to consider in the Angler of the Year race.   READ MORE »

6 Super Tournament Story Lines

6 Super Tournament Story Lines

The expanded field list for the new Tackle Warehouse Pro Circuit Super Tournaments brings with it some very fun matchups and the potential for some record chases to reignite. Because many of the newly added Major League Fishing anglers have had longer careers than those at the top of the Pro Circuit, they’re in a unique position to chase down some records that otherwise may not have been touched this year. In other cases, it’s simply going to be a pleasure to watch the best of the best duel on some epic bodies of water. READ MORE »

Be a Super Tournament Marshal

Be a Super Tournament Marshal

The Tackle Warehouse Pro Circuit is professional bass fishing’s premier five-fish-limit tournament trail, and it’s about to get a whole lot more exciting for the remainder of 2020. READ MORE »

Super Tournament Roster Set

Super Tournament Roster Set

FLW, the world’s largest tournament-fishing organization, released the expanded 2020 Tackle Warehouse Pro Circuit roster, which now includes top Major League Fishing (MLF) pros like Jacob Wheeler and reigning REDCREST Champion Edwin Evers. When the season restarts June 23 on Lake Chickamauga, the final three regular-season Pro Circuit events will feature 209 boats and nearly $4 million in prize money. As previously announced, FLW extended invitations to all MLF anglers to compete in three “Super Tournaments” after MLF announced an abbreviated schedule due to the mid-season pause in response to the coronavirus pandemic. READ MORE »

The BFL Returns on May 30

The BFL Returns on May 30

After a nearly two-and-a-half-month hiatus from fishing tournaments, FLW is excited to get back to business with the 2020 Phoenix Bass Fishing League season. The action kicks off again on May 30 with the Volunteer Division on South Holston. From there, the BFL season will waste no time getting back in the swing of things with a full slate of tournaments scheduled nearly every weekend from the beginning of June through October. READ MORE »

2020 FLW TV Schedule

2020 FLW TV Schedule

Beginning on July 3 and running through Dec. 27, FLW will air 312 hours of Tackle Warehouse Pro Circuit action on the Outdoor Channel and Sportsman Channel. New this season, episodes have been expanded to two hours long. Each show goes in depth to break down the final rounds of competition, with six unique episodes covering each day of the Tackle Warehouse Pro Circuit TITLE Championship. READ MORE »

2020 FLW TV Schedule

2020 FLW TV Schedule

READ MORE »

Pros’ Favorite Shad Spawn Baits

Pros’ Favorite Shad Spawn Baits

With the bass spawn winding down across the South, it’s time to capitalize on the shad-spawn bite. Shad spawn patterns usually don’t last long into the day, but fishing the shad spawn can be a fantastic way to catch a pile of fish and some big ones to boot. READ MORE »

Mark Rose’s Greatest Hits

Mark Rose’s Greatest Hits

FLW is looking forward to getting back on the water once it’s safe to come together and fish tournaments again. In the meantime, we’ll be offering a little retrospective on some of the all-time greats who’ve fished with FLW through the years. This time around we’re shining the spotlight on Mark Rose. From his Angler of the Year title to winning multiple FLW Tour events and even joining the bass-fishing millionaire club, it’s easy to see why the Arkansas pro is one of the best to have ever fished with FLW. READ MORE »

FLW Adds Free High School Minicamps

FLW Adds Free High School Minicamps

In response to the Covid-19 pandemic, Murray State University announced that it will not host any summer camps this year. As a result, FLW is replacing its traditional High School Fishing Camp, scheduled for July 22-24, with a series of FREE minicamps held in conjunction with three Tackle Warehouse Pro Circuit tournaments. Campers already registered will receive a full refund and are invited to participate in any of the FREE minicamps.  READ MORE »

FLW Classics – Week 4

FLW Classics – Week 4

This week’s shows cover some old FLW Series Western Division events, Steve Clapper's 2007 FLW Tour Open win on the Detroit River and more high-level tournament action.  READ MORE »

FLW Making Final Preparations for Restart

FLW Making Final Preparations for Restart

FLW is looking forward to restarting the tournament season May 28-30 with the Toyota Series stop on Pickwick Lake in Florence, Ala. There may be a few more schedule changes as states ease restrictions and reopen their economies at different rates, but FLW is optimistic that most of the schedule changes are behind us.      READ MORE »

FLW Revamps Pro Circuit

FLW Revamps Pro Circuit

FLW has extended an invitation to Major League Fishing’s pro anglers to join the Tackle Warehouse Pro Circuit for three newly created “Super Tournaments” that include an expanded roster and higher payouts. The Super Tournaments are made possible by the abbreviated schedules announced recently by MLF and FLW. READ MORE »

Anglers React to Super Tournaments

Anglers React to Super Tournaments

When the 2020 Tackle Warehouse Pro Circuit season picks back up, it will be with a new schedule, some new anglers and a lot more money in the pot than originally planned. READ MORE »

Pros’ Favorite Baits for May

Pros’ Favorite Baits for May

Across the country, May is a great time for fishing, with tons of bass in and around the spawn and a lot of baitfish species spawning as well. With warming water, it’s a great chance to throw a topwater for the first time, or really to do just about whatever you want in some parts of the country. READ MORE »

2020 MLF College Faceoffs Canceled

2020 MLF College Faceoffs Canceled

Originally announced in early March, the four-tournament series featuring the MLF-style catch-weigh-immediately-release format was set to feature 20 College Fishing teams that qualified through the Abu Garcia College Fishing presented by YETI circuit. MLF officials are hopeful that the Faceoff events will return in 2021. READ MORE »

How to Make a Buzzbait Squeak

How to Make a Buzzbait Squeak

One of the key aspects of buzzbait fishing is the sound, and Bradley Dortch modifies his with a file and some pliers to get the most squeak he can. READ MORE »

Q&A: Winnipeg Jets Goalie Connor Hellebuyck

Q&A: Winnipeg Jets Goalie Connor Hellebuyck

The Michigan native, who now spends plenty of time on the ice in Winnipeg – both playing hockey and chasing after walleyes – grew up fishing, and bass fishing has become one of his favorite fair-weather hobbies. We got a chance to chat with Hellebuyck about his background in fishing, his future on the water and his present on the ice. READ MORE »